MY SCANNERS

[ADMIN]

I OWN 3 HANDHELD SCANNERS
200 CH BEARCAT XLT
200 CH SPORTCAT 200
100 CH SPORTCAT 180

i have never had any problems with these scanners. the only time i had a problem was with the bearcat xlt with needing new battery

i need a mobile for my vehicle and a base scanner for the house

[Scnrnt.]

Here is a list of my scanners. I would recommend anyone of them. ;D

Bearcat 210xlt 40ch.base
Bc.100 xlt 100ch.handheld
Bc.178 xlt 100 ch.base
Bc.890 xlt 200 ch.mobile/base
Sportcat 150B 100 ch. heandheld
Bc.895 xlt 300 ch. mobile/base trunktracker 1
Sportcat 180 xlt 100 ch. handheld alphanumeric
Bc.245 xlt 300 ch. handheld trunktracker 2
Bc.780 xlt 500 ch. mobile/base trunktracker 3
Pro-79 200 ch. handheld
Pro-95 1000 ch. handheld trunktracker
Pro-99 500ch. racescanner wth/ctcss tone code
Pro-83 200ch. handheld scanner
Pro-97 1000ch.Handheld trunktracker
I have three outdoor antennas 1.) SA-1 scanner antenna. 2.) Scantenna 3.) Radio shack Discone
I also have a large amount of different handheld antennas. And last a GRE-super amp. for the handheld scanners.
I have two MURS radios green dot frequencies (154.600Mhz.)
And 1 GMRS radio,and several sets of FRS radios.

The ones I like the best are, Base the Bearcat 780xlt, and the Bearcat 890,and 895 xlt
Handheld best I like the Pro-97, Pro-99, Sportcat 200xlt. and the pro-83.

[FRITZ]

nice scanners everyone i have the sportcat 200xlt

[mikem1]

I have a Radio Shack PRO-106 that iss driving me nuts. Anyone have one of these? I also have a Pro 83 and a Bearcat 245 both are good as gold.
Mike McManus

[captclint]

Sept 21, 2009 6:17:29 GMT -5 mikem1 said:

I have a Radio Shack PRO-106 that iss driving me nuts.

That's the wave of the current scanners from all manufacturers: Bankless. It takes some getting used to. My recommendation is software. This not only makes the programming easier, but helps you understand the various features of the radio. Here is a list:
wiki.radioreference.com/index.php/Object_Oriented_Scanner_Software

I prefer ARC500, but win500 is getting some good press.

[mikem1]

RE Radio Shack Pro-106

I have a glitch in the start up menu. I put a search in the object menu that I can't get rid of. Otherwise it is a good scanner.

[mikem1]

Oh and I do use the butel ARC 500 software with the scanner.

[captclint]

Nov 4, 2009 8:21:53 GMT -5 mikem1 said:

RE Radio Shack Pro-106

I have a glitch in the start up menu. I put a search in the object menu that I can't get rid of. Otherwise it is a good scanner.

This may help you: marksscanners.com/106_197/106_197.shtml

Another thought is to read from scanner all customer searches so you can see which one needs to be eliminated, and then send to scanner all searches minus that one. As a last resort, there should be a system reset command that will wipe everything out. Then you can reload from ARC500 what you want. Not sure what that command is for RS.

[mgc1955]

Greetings Fellow Scanner Enthusiast,

My name is Mark, Amateur Radio Operator WN3SIX, I live in Nanticoke, PA.

I was wondering if you may be able to direct me to any website where I can obtain a list of Luzerne County scanner frequencies that list not only the normal scanner frequency information but also the various repeater splits, e.g. not only the OUTPUT FREQUENCY of each agency but ALSO their associated INPUT FREQUENCIES. I have gleaned the PL codes from existing lists but I am in need of their associated repeater INPUT frequencies.

Any help along these lines would be most appreciated. I work with various agencies as a technician and having this information would be most helpful for technical reasons, nothing illegal of course.

Thank you in advance for any assistance you may be able to provide !

Best regards,   Mark...

PS:  You may e-mail me directly at:  [e-mail]